View Source: HueZigbee

You are viewing an old revision of this page. View the current version.
!!!Some Thoughts on the Current State of Home Automation

!! Overview

I've been running [[https://www2.meethue.com/en-us|Hue Smart Lightbulbs]] in my house for a couple of years.  The basic idea is there's a hub that connects to your home network and then communicates with light bulbs or other devices over some sort of wireless protocol.  Prior to 2018, Hue used an older variant of the [[https://en.wikipedia.org/wiki/Zigbee|Zigbee protocol]]  called [[https://www.zigbee.org/zigbee-for-developers/applicationstandards/zigbee-light-link/|ZLL]] or Zigbee Light Link.  While some bulbs from other manufacturers used ZLL and would work with the Hue system, other bulbs used a *different* Zigbee variant called [[https://www.zigbee.org/zigbee-for-developers/applicationstandards/zigbeehomeautomation/|Zigbee Home Automation]] or ZHA.

As you can imagine, this created great confusion and made it very difficult to determine which devices could interoperate.  Thankfully, the folks in charge of this realized it was a problem and unified the protocols for Zigbee 3.0.  The result is that any device that claims to be zigbee 3.0 compatible should be interoperable (although there are still a bunch of caveats).

When Philips upgraded the Hue system in late 2018, they upgraded the system to Zigbee 3.0, which opened up lots of possibilities for using third party devices.  The great thing is that this upgrade was done across their hardware - any existing Hue hub now supports Zigbee 3.0, and the same goes for the existing bulbs (I think).

!! Beginning State

When I first set up Hue in my house a couple years ago, I had a very simple setup: the Hue hub and two light bulbs.  Even the most basic bulb cost more than $20 so it quickly got expensive to upgrade your whole house.  Also, bulbs aren't very convenient without wireless remotes, because someone will just turn the power off to the lamp or fixture and then your bulb is no longer on the network.  Thus I also purchased a [[https://www2.meethue.com/en-us/p/hue-dimmer-switch/046677473372|Hue wall mounted remote]] to control the bulbs.  So really to make a useful system, you need a remote in each room and hue bulbs in every fixture.  That's expensive.

This all worked just fine, but it wasn't really a comprehensive system.  Also note that there weren't really many different kinds of Hue devices:  there were a few types of bulbs and and remote switches and that was about it.

!! Finding out about Zigbee 3.0

In 2018, I found out about the move to Zigbee 3.0 for Hue systems, so I wanted to find some third party devices to use.  In particular, I wanted a smart outlet I could use with my Hue.  I tried a couple different ones from Sylvania and GE that other people thought might work.  No luck.  I finally found
----
[[CategoryGeekStuff]]
View Source: HueZigbee

Main Categories

Search

Toolbox

RecentChanges

Favorite Categories

Views
